  |
|
 |
Pathmaker Keep Multiple Batteries Charged and Isolated PathMaker is a battery combiner that automatically connects 2 or 3 battery banks for simultaneous charging and isolates them during discharge. A toggle switch allows you to manually parallel your battery banks for maximum starting power. For use with 12 or 24-volt systems, PathMaker can be custom programmed and is easy to install. Available in 2 or 3 bank versions with models at 100, 200 and 250 Amps. |
|
Features Automatic, High Current Switch for Simultaneous Charging Pathmaker features an automatic, high current switch for convenient and simultaneous charging of multiple batteries. LED System Status Display PathMaker features three LEDs that tell the user what mode the system is in. No Associated Voltage Drop PathMaker allows you to smartly charge multiple battery banks from a single charge source without voltage drops associated with the use of an isolator. Programmable controls determine when the batteries should be combined or disconnected. Battery banks are also monitored for high voltage. If a run-a-way charger is being used, PathMaker will automatically disengage the battery banks. Features Automatic, High Current Switch for Simultaneous Charging Pathmaker features an automatic, high current switch for convenient and simultaneous charging of multiple batteries. LED System Status Display PathMaker features three LEDs that tell the user what mode the system is in. No Associated Voltage Drop PathMaker allows you to smartly charge multiple battery banks from a single charge source without voltage drops associated with the use of an isolator. Programmable controls determine when the batteries should be combined or disconnected. Battery banks are also monitored for high voltage. If a run-a-way charger is being used, PathMaker will automatically disengage the battery banks. Automatic, High Current Switch for Simultaneous Charging Pathmaker features an automatic, high current switch for convenient and simultaneous charging of multiple batteries. LED System Status Display PathMaker features three LEDs that tell the user what mode the system is in. No Associated Voltage Drop PathMaker allows you to smartly charge multiple battery banks from a single charge source without voltage drops associated with the use of an isolator. Programmable controls determine when the batteries should be combined or disconnected. Battery banks are also monitored for high voltage. If a run-a-way charger is being used, PathMaker will automatically disengage the battery banks.
Specifications Options Available in 2 or 3 battery bank options and in 100, 200 or 250 amp current capacities. Accessories An optional remote allows you to control the ON/OFF switch, and Auto and Momentary Combine features. |
|
| Specifications | |
| Mode | Pathmaker |
| Part Number | 7-33 Volts (24V assumed if > 18.0V) |
| Low Voltage Disconnet | Range12.8-13.2V (X2 for 24V) |
| Voltage RangeConnect Voltage Range | 13.1-13.5V (X2 for 24V) |
| High Voltage Disconnect Range | 14-16V (X2 for 24V) |
| Current Ratings | 100A: 100A continuous, 400A Peak 200A: 200A continuous, 600A Peak |
| Idle Power Consumed | 0.2-0.35 W @12V, 0.4-0.7W @24V |
| Indicator Lights | Disabled: Yellow Connected: Green High Voltage Disconnect: Red Wait for Reconnect: Flashing Red |
| P hysical Specifications | |
| Dimensions | 100A: 6.3 X 7.4 X 3.6" 200A: 7.6 X 7.4 X 3.2" |
|
Download Literature |
|
|
Press Releases |
|
