|
Link 2000
Monitor Two Battery Banks and Control
Your Freedom Inverter/Charger
Link 2000 is a two-bank battery
monitor with remote control for your Freedom Inverter /
Charger. A simple and easy-to-use interface provides
precise information on amp hours, kilowatt hours and
historical battery information including number of
cycles, deepest discharge, and average depth of
discharge. Link 2000 automatically calculates charging
efficiency.
Link 2000 and Freedom Inverters /
Chargers communicate with each other via a standard 4
conductor telephone cable. This allows you to program
four different battery types, battery temperature, AC
power sharing and the inverter's idle mode sensitivity.
The Freedom Inverter / Charger will also pass
information to Link 2000's display such as error codes
and charger status. Link 2000 also allows you to operate
the Inverter / Charger remotely from the panel. Link
2000 can be used for 12 or 24-volt systems.
|
