Lugs

SATCOMS

Tinned & Brazed closed end lugs

General-purpose seamless electrical terminals. Made from 100% pure electrolytic copper, fully annealed to prevent cracking while being crimped and while in service. Tin-plated for optimum corrosion resistance. All lugs have a flared ‘bell’ shaped entry to facilitate wire insertion. Dockyard Electrics’ close end lugs are uniquely made so that there is no exposed seem on the outside of the terminal.

FEATURES;

· Tin-plated, ETP (electrolytic tough pitch) CDA –110, ASTM-B-152 copper, rated at 100% conductivity.

· UL and CSA approved.

· Flexible: single, double or three way connection can be made by stacking parts

· No exposed seems, reduces corrosion risks.

Cat #

Cable

Size

Stud size

Pkg

Our

Price

14334
2/0

Ľ-5/16-3/8

2

$2.17

14319

1/0

Ľ-5/16-3/8

2

$1.83

14316

1

Ľ-5/16-3/8

2

$1.75

14328

2

Ľ-5/16-3/8

2

$1.58

14343

4

Ľ-5/16-3/8

2

$1.33

14352

6

Ľ-5/16-3/8

2

$1.08

14358

8

Ľ-5/16-3/8

2

$1.08

Please specify stud size

Heat Shrinkable Terminals

Heat shrinkable terminals have quickly become the most requested connector among Marine professionals. They uniquely solve several different conditions that undermine marine electrical circuits, such as corrosion. Excessive vibration and abrasion are controlled to a much greater extent than with traditional terminals. The ease and speed by which these connectors create a fully environmentally sealed connection is unmatched.

Ring Terminals

Ring terminals are the most secure type of tongue style because they cannot slip of a screw or stud; they should be used on all key circuits. Protects terminations from water, condensation, salt spray and corrosion

· Provides strain relief

· Added vibration protection in rugged environments

· Cost effective by extending the longevity of wire

· Operating Temperature: -55C to 125C

· Shrink Ratio: Approx 3 to 1 at 135C

· Dielectric Strength: 900V/mil

· Volume Resistively: 1015 ohm-cm3

· Available in gauge sizes 22 to 8

WIRE RANGE	STUD SIZE	Cat #	INSUL. COLOR	Pkg	OUR PRICE
22-18 AWG	6/8/10	14241	Red	5	$3.33
22-18 AWG	Ľ	14260	Red	5	$3.33
16-14 AWG	6/8/10	14245	Blue	5	$3.33
16-14 AWG	1/4	14261	Blue	5	$3.33
12-10 AWG	6/8/10	14249	Yellow	5	$3.33
12-10 AWG	1/4	14265	Yellow	5	$3.33
8 AWG	10	14253	Pink	5	$4.66

Please specify stud size

Fork Terminals

Marine applications require a means of securing the terminal to a post or screw beyond just the pressure of the screw to the terminal itself. Two innovations to the straight fork have been made, locking forks or "snap spades" and flanged forks. Locking forks have projections in

side the fork causing the connector to "snap" onto the screw or bolt holding the terminal captive. Flanged forks have the ends turned up,

holding the terminal captive should the screw loosen. Functionally, fork terminals are great to use in rework situations where it can be difficult to completely remove the fastener.

WIRE RANGE	STUD SIZE	Cat #	INSUL. COLOR	Pkg	OUR PRICE
22-18 AWG	6/8/10	14221	Red	5	$3.33
16-14 AWG	6/8/10	14225	Blue	5	$3.33
16-14 AWG	1/4	14233	Blue	5	$3.33
12-10 AWG	6/8/10	14229	Yellow	5	$3.33
12-10 AWG	1/4	14237	Yellow	5	$3.33

Please specify stud size

Butt connectors

When joining two wires of the same size

Wire

Range

Cat #

INSUL.

COLOR

Pkg

OUR

PRICE

22-18 AWG

14201

Red

5

$3.33

16-14 AWG

14205

Blue

5

$3.33

12-10 AWG

14209

Yellow

5

$3.33

8 AWG

14213

Pink

5

$5.33

3-Way and 4-way connectors
	3 or 4 ring terminals are tightly riveted together to allow the connection of multiple wires into one circuit. The centre hole diameter is .160" Available in vinyl insulation only.

Wire Range	Our Price	Cat # 3-Way	Cat # 4-Way	Our Price	Pkg
22-18 Awg	$2.50	144901	144931	$2.75	2
16-14 Awg	$2.50	144911	144941	$2.75	2
12-10 Awg	$2.50	144921	144951	$2.75	2

NYLON INSULATED CONNECTORS

Disconnects

Also known as quick connect or slip-on connectors. Connection is accomplished by fitting the female part over the male tab. Holding force is excellent

Cat #	Female	Male	Colour	Qty/pack	Our Price
22-18 AWG	14418	14412	Red	5	$2.69
16-14 AWG	14430	14427	Blue	5	$2.69
12-10 AWG	14442	14439	Yellow	5	$2.69

Piggybacks Disconnects
	Piggybacks are female and male tabs combined into one disconnect. Primarily used to allow additional circuits to be added to existing equipment without costly rework. Available in vinyl insulation only.

Wire Range	Cat #	Tab Size	Pkg	Our Price
22-18 Awg	144448	.250 x .032	5	$2.83
16-14 Awg	14451	.250 x .032	5	$2.83
12-10 Awg	14454	.250 x .032	5	$2.83

Pin Terminals

Pin connectors are primarily designed for compression type terminal blocks.

Available in vinyl insulation only.

Wire Range	Cat #	Insulation Colour	Pkg	Our Price
22-18 Awg	14401	Red	5	$2.69
16-14 Awg	14404	Blue	5	$2.69
12-10 Awg	14407	Blue	5	$2.69

Bullet Connectors
	Bullet connectors have advantages similar to disconnects, providing a reliable in-line connection. Terminals are made to close tolerance to produce holding friction when parts are mated.

Wire Range	Size	Plug Cat #	Receptacle Cat #	Insulation Colour	Pkg	Our Price
22-18 Awg	0.156	144605	144601	Red	5	$0.60
16-14 Awg	0.156	144615	144611	Blue	5	$0.60
12-10 Awg	0.180	144625	144621	Blue	5	$.060