Charging systems
[ Home ] [ Manufacturers ] [ Generators ] [ Autopilots ] [ Batteries ] [ accessories ] [ Charging systems ] [ Satelite phones ] [ Regulators ] [ Radios ] [ Electronics ]

[ Home ] [ Manufacturers ] [ Generators ] [ Autopilots ] [ Batteries ] [ accessories ] [ Charging systems ] [ Satelite phones ] [ Regulators ] [ Radios ] [ Electronics ]

Inverter Chargers Offer the best value for money.

Advanced Electronic, Fully Automatic 3-Step Marine Battery Charger
	Distributed On-Demand Charging - Automatically senses and distributes a full 10, 15 or 30 amps (model specific) to any one bank or combination of all banks.
	Faster Charging - 2 to 3 times faster than traditional battery chargers with true 3 step charging technology. Each step is electronically controlled for the fastest charge.
	Professional Performance - 100% battery charge guaranteed. 100% charging output with AC power as low as 90 VAC while using long extension cords at the dock, lodging site or home. Proven to condition and extend the life of your batteries.
	Compact Lightweight Design - Rugged Space Saver all aluminum housing is half the height of leading traditional chargers. Unit is not potted and is completely serviceable for lifetime of use under ProMariner's lifetime repair guarantee.
	Easy Operation - Pre-wired for easy installation. On-board Push-to-Test charge level and mode indicators . Internal battery selection-lead acid, gel or AGM compatible.
	Step 1: Fast Charge - Charger delivers maximum amperage to batteries for the fastest charge (current regulation mode) until battery voltage is raised to 14.6 VDC.
	Step 2: Absorption Charge - Maximizes charge and holds voltage at 14.6 VDC for 3 hours (voltage regulation mode) reducing sulfate buildup and conditions batteries.
	Step 3: Float Mode - A precision 13.3 VDC finishing voltage that maintains your batteries, (step down voltage regulation mode) which is perfect for short or long storage periods and will never overcharge your batteries.
	ProMariner's advanced electronic technology will deliver 2 times the amps to your batteries in the same amount of time when compared to leading traditional linear chargers. That means the ProTournament will charge your batteries twice as fast.
	ProTournament's Distributed On-Demand Charging will automatically distribute its full rated output of 10, 15 or 30 amps (model specific) to any one bank or combination of all battery banks. ProTournament distributes and uses every charging amp with no waste unlike other 2 and 3 bank chargers with an amp limit per bank.

                All Prices FOB plus freight

3 OUTPUTS

·           Will independently charge (3) 12V batteries, condition, de-sulfate, deep charge to 14.6 & float at 13.3 (field adjustable) (quick switch to gel 14.1/13.8)

·          Certified to CE, Ignition protected, and UL 1236 Marine.

·          Full output from 90-270VAC and 45-440 Hz

·          Current rating is the nominal average return to heavy-duty marine batteries:  Any one or all three outputs. Promatic 30-3: 30 amps (2.4/2.5 VPC) *Average return to heavy duty flooded lead/acid

                All Prices FOB plus freight

Advanced Electronic, Fully Automatic 4-Step Marine Battery Charger/Power Supply Faster Charging - 2 to 3 times faster than traditional battery chargers. With true 4-step charging technology, each step is electronically controlled for the fastest charge. Auto-Ranging AC Input - Automatically accepts global voltages of 90 VAC to 270 VAC at 45-440 Hz. Conditions and Extends Battery Life - Absorption cycle ensures 100% charge and knocks sulfates off battery plates, extending battery life. Gentle float mode maintains batteries at 100% charge. Less Maintenance - Advanced charging reduces water consumption. Field Selectable - Use with lead/acid or gel batteries (AGM factory option). Select length of absorption charge cycle based on size of batteries. At-a-Glance LED Indicators - Provides status of charge cycle. Built-In Safety - Reverse-polarity, ignition and over temperature protection. Easy Installation - May be mounted in any orientation. One-Year Warranty - Includes lifetime repair guarantee. Certified to - UL Marine 1236/SA Sail or power: up to three heavy-duty marine battery banks with moderate to heavy DC usage at the dock. Typically installed on a 22-50' yacht. 12V engine and/or gen set starting - maintainer / charger / conditioner. Live aboard up to 50 amps. Cruising sailors will average up to 50 amps return from 50% discharge. (ProTech 1250) Anywhere 30 to 50 amps at 13+ volts is needed to power equipment with or without a battery in line. Replaces up to a 150 amp Ferro-resonant or conventional charger. Available with 24 volt-25amp output in ProTech 2425. Also available in 32 and 36V output. Step 1: Fast Charge - Charger will deliver its maximum amperage rating to the connected batteries for the fastest charge (current regulation mode) until battery voltage is raised to 14.6V (lead acid factory setting). At this time, the ProTech will shift to step 2. Step 2: Absorption Charge - Maximizes charge and holds voltage (voltage regulation mode) at 14.6V (lead acid factory setting) for 1 to 4 hours (selectable based on battery size), while letting the batteries determine the amount of amps they can accept. This mode creates activity in the batteries, reducing sulfate buildup, and conditions the batteries for an extended life. After the programmed 1 to 4 hours have elapsed, the ProTech will shift to step 3. Step 3: Float Mode - A precision 13.3V (lead acid factory setting) finishing voltage that maintains each battery (step-down voltage regulation mode), which is perfect for short or long storage periods and will never overcharge your batteries. ProTech will deliver its full rated output for houseloads including: lighting, electronics and pumps. Step 4: Recycle - If there are very large loads on the battery while the charger is on, the unit will recycle to the first step, ensuring that batteries stay fully charged.

 All Prices FOB plus freight

Statpower in Marine

Today's boater  wants power - dependable, reliable AC power to meet modern electrical demands both far from shore and at anchor. Statpower's power conversion equipment gives you the ability to power all the comforts of home while on the water. As the marine aftermarket leader in developing AC inverter technologies, Statpower meets the unique needs of the marine customer everyday with its complete family of inverters, chargers, and inverter/charger combination products. We offer the marine buyer powerful solutions for varying levels of power requirements and parameters. From cost effective solutions to high-end systems, Statpower's products are designed specifically with the marine customer in mind.

Microwave a meal on a family boat trip using a Statpower inverter (See section on chargers and inverters). Recharge your boat's batteries and get DC power at dockside with TRUE charge battery chargers. Make a strawberry margarita during a summer boat cruise, and use true sine wave inverters to power your most sensitive AC loads, avoiding interference with other electronics on board such as VHF radios or electronic GPS instrumentation.

Install by connecting a set of battery cables* to your 12 volt deep-The following is a list with descriptions of each of the PROwatt power inverter products we design, manufacture, and market globally. Click on the product of your choice for more information.

TRUECHARGE Battery Chargers

Multi-stage charging capability for ripple-free performance and prolonged life of your batteries.

TRUECHARGE 10TB - This 10 amp continuous duty, multi-stage, microprocessor controlled battery charger provides exceptional charging performance when charging from inconsistent line voltage. Ideal for 12-volt lead-acid batteries from 25 amp-hours to 200 amp-hours.

TRUECHARGE 10 - Utilizing alligator clip leads, our user-friendly 10-amp microprocessor controlled charger, accommodates 12-volt lead acid batteries from 25 amp-hours to 200 amp-hours. It is compact, easy to use, and operation is totally silent.

TRUECHARGE 20+ - Designed with 3-bank battery charging in mind, this 20-amp microprocessor controlled charger automatically regulates the charging process for the user, greatly simplifying the task of charging batteries. Recommended for batteries from 100 amp-hours to 400 amp-hours.

TRUECHARGE 40+ - Our 40 amp micro-processor controlled battery charger quickly recharges up to 3 deep-cycle battery banks, and knows when to stop charging to avoid cell damage. This unit accommodates 12-volt lead acid batteries from 200 amp-hours and up.

All prices FOB plus freight

TRUECHARGE 20/40 Remote Display Panel - Plugging into the remote panel jack on the DC output side of the charger units, the panel provides battery voltage status information from the location of your choice via LED indicators, and the battery charging current via a bar graph amp meter display. The right addition to accurately display charging and battery information.

Battery Temperature Sensor - Designed for use with either the PROsine 2.0, or the PROsine 3.0 Inverter/Charger, or any TRUECHARGE 20+ or TRUECHARGE 40+ Smart Battery Charger. This accessory gives the user added peace-of-mind by automatically adjusting the charger output according to the temperature of the battery electrolyte. This makes for a more accurate temperature-compensated charge.

The remote sensor easily connects to the battery terminal and plugs into the "Temp. Sensor" jack conveniently located on the units.

[ Home ] [ Manufacturers ] [ Generators ] [ Autopilots ] [ Batteries ] [ accessories ] [ Charging systems ] [ Satelite phones ] [ Regulators ] [ Radios ] [ Electronics ]