IC-M127

IC-M127 Specifications
This information is taken directly off of the ICOM IC-M127 brochure.

 

General

  • Frequency Range: Transmit: 156.025 -157.425 MHz; Receive: 156.025 - 163.275 MHz
  • Usable Channels: All U.S.A., International and Canadian channels; plus 10 weather channels
  • Mode: FM(16K0G3E); DSC (16K0G2B; with optional UX-130)
  • Power Supply Requirement: 13.8 V DC +/-15% (negative ground)
  • Current Drain (at 13.8 V DC):
    • Transmit: 6.3 (high); 2.0 A (low)
    • Receive: 1.5 A (max. audio); 0.5 A (standby)
  • Usable Temperature Range: -20°C~ to +60°C (-4°F to +140°F)
  • Frequency Stability: +/-5 ppm
  • Antenna Connector: 50 ohms (SO-239)
  • Dimensions: 229(W) x 78(H) x 220(D) mm; 9(W) x 3.1(H) x 8.7(D) in (projections not included)
  • Weight: 2.5 kg; 5.5 lb

 

Transmitter
  • Output Power (at 13.8 V): 25 W (high); 1 W (low)
  • Modulation System: Variable reactance phase modulation
  • Spurious Emissions: Less than -70 dB
  • Max. Freq. Deviation: +/-5 kHz
  • Microphone Impedance: 600 ohms

 

Receiver
  • Receive System: Double conversion superheterodyne
  • Intermediate Frequencies: 1st: 21.8 MHz; 2nd: 455 kHz
  • Sensitivity: 0.25µV for 12 dB SINAD (typical)
  • Squelch Sensitivity: 0.32 µV (threshold), 1.0 µV (tight)
  • Adjacent Channel Selectivity: 750 dB
  • Spurious Response Rejection Ratio: 75 dB
  • Intermodulation Rejection Ratio: 75 dB
  • Audio Output Power: More than 5 W at 10% distortion with a 4 ohms load (10 W for the hailer function)
  • Audio Output Impedance: 4 ohms

 

Options
  • MB-66 FLUSH MOUNT: For mounting the IC-M127 to a panel. Available in white or black.
  • OPC-457 NMEA CABLE: Allows you to connect NMEA equipment such as a GPS receiver.
  • PS-60 DC POWER SUPPLY: For coastal station operation.
    • Output Voltage:13.6 V DC
    • Max. Current Drain: 30A
  • PS-66 DC-DC CONVERTER: Enables use of a 24 V boat battery.
    • Input voltage: 19 to 32 V DC
    • Output voltage: 13.6 V DC
  • UA-4 AUDIO AMPLIFIER: Boosts hailer output to a max. of 30 W. Power is controlled via the IC-M127.
  • UT-98 VOICE SCRAMBLER UNIT: Provides 128 analog voice scramble codes for communications privacy.
  • UX-130 DSC UNIT: Provides DSC capabilities.