Mscan Meteo Pro

The revolutionary new program, combining the ability to decode FAX, NAVTEX and RTTY signals in a single program without the need for an external interface! Never before has it been so easy to receive every piece of vital information you need for safe passage: all you need is Mscan Meteo Pro, an SSB receiver and a laptop. An article in the Dutch magazine Boot Bits concluded that Mscan Meteo Pro is "highly recommended for the serious yachtsman!".

Mscan Meteo Fax

This program has the same FAX capabilities as Mscan Meteo Pro, but lacks NAVTEX and RTTY mode, timer and receiver control. If you are not interested in automated receiver control, and only need to receive weather charts, then Mscan Meteo Fax is a low priced alternative for Mscan Meteo Pro.

System requirements: Windows 95, 98, Me, 2000 or XP. Pentium 120 compatible or better, 24 Mb RAM or more, sound card or external modem (PTC-II/IIe/IIpro, Multiscan, EasyDSP, HariFax).

Interface cables

For some receivers and transceivers remote control of frequency and mode is only available by using an external interface. For all models supported by Mscan Meteo we supply a suitable interface cable. Each interface has a DB9 connector for connection to the serial port of the PC/laptop and a suitable connector for connection to the receiver or transceiver. A power supply is not needed as all power is taken from the serial port.

order Barrett900pc

order CATpc

order CATMpc

order HF-150pc

order IC-CIVpc

· Barrett900pc (for Barrett 900 series, includes audio cable)

· CATpc (for Yaesu models with 6 pin DIN connector)

· CATMpc (for Yaesu models with 6 pin mini DIN connector)

· HF-150pc (for Lowe HF-150, similar to IF-150 interface)

· IC-CIVpc (for ICOM M710, ICOM M711 and all ICOM models with CI-V connection)